Electronics

2015+ Send in PCM Unlock - $249

This item requires that you send in your factory PCM for unlocking.
Please complete this document and email it to mike@ostdyno.com: OST PCM Order Form
Also please attach a read of your PCM using HPtuners.
Once we receive your Order form we will forward shipping instructions.
If you need help taking a factory read please watch this video - OST Dyno HPtuners Video

 

2018 Hellcat/Demon /Trackhawk - $799

2018+ Dodge Hellcat, Demon & Trackhawk Unlocked PCM for tuning. This is for a new, unlocked PCM. 
Please complete this document and email it to mike@ostdyno.com: OST PCM Order Form
Also please attach a read of your PCM using HPtuners. 
If you need help taking a factory read please watch this video - OST Dyno HPtuners Video

 

2015-2017 Hellcat Unlocked PCM - $899

2015-2017 Dodge Hellcat Unlocked PCM for tuning. This is for a new, unlocked PCM. 
Please complete this document and email it to mike@ostdyno.com: OST PCM Order Form
Also please attach a read of your PCM using HPtuners. 
If you need help taking a factory read please watch this video - OST Dyno HPtuners Video

 

2015+ Non-Hellcat Unlocked PCM - $699

2015+ DodgeChryslerRAM and Jeep Unlocked PCM for tuning.
This is for a new, unlocked non-Hellcat PCM. 
Please complete this document and email it to mike@ostdyno.com: OST PCM Order Form
Also please attach a read of your PCM using HPtuners. 
If you need help taking a factory read please watch this video - OST Dyno HPtuners Video

 

 

HP Tuners MPVI2- $299.97

*2018+ Chrysler vehicles will also need an OBD2 Double Bypass module*

MPVI2, the latest generation of hardware from HP Tuners.

This device will come without credits. You will need to purchase credits to make tuning modifications.

HP Tuners is our software/hardware of choice at OST Dyno. We have tuned on many platforms over the course of many years and HP Tuners takes the cake. Reading, writing, and logging is easier than ever. The module does not marry to the car like other tuners, but rather, cars marry to the module. This means you can tune hundreds of vehicles from one module as long as you purchase the necessary credits.

Vehicle support is vast. See the below list for your application and credits needed.
***Supported Vehicle List***

 

HP Tuners MPVI2 w/ 2 Credits - $399.97

*2018+ Chrysler vehicles will also need an OBD2 Double Bypass module*

This device comes pre-loaded with 2 credits. Two credits will tune the PCM on your GM or Hemi vehicle. Two credits will also tune both the PCM/TCM on older NAG1 trans vehicles. 

MPVI2, the latest generation of hardware from HP Tuners.

HP Tuners is our software/hardware of choice at OST Dyno. We have tuned on many platforms over the course of many years and HP Tuners takes the cake. Reading, writing, and logging is easier than ever. The module does not marry to the car like other tuners, but rather, cars marry to the module. This means you can tune hundreds of vehicles from one module as long as you purchase the necessary credits.

Vehicle support is vast. See the below list for your application and credits needed.
***Supported Vehicle List***

 

HP Tuners MPVI2 w/ 4 Credits - $499.95

*2018+ Chrysler vehicles will also need an OBD2 Double Bypass module*

This module come pre-loaded with 4 credits. This is optimal for TCM tuning only on the newer 8-speed auto Hemi transmission.

MPVI2, the latest generation of hardware from HP Tuners.

HP Tuners is our software/hardware of choice at OST Dyno. We have tuned on many platforms over the course of many years and HP Tuners takes the cake. Reading, writing, and logging is easier than ever. The module does not marry to the car like other tuners, but rather, cars marry to the module. This means you can tune hundreds of vehicles from one module as long as you purchase the necessary credits.

Vehicle support is vast. See the below list for your application.
***Supported Vehicle List***

 

HP Tuners MPVI2 w/ 6 Credits - $599.93

*2018+ Chrysler vehicles will also need an OBD2 Double Bypass module*

This module comes pre-loaded with 6 credits. This can tune three PCMs or both the PCM and TCM on your newer 8-speed auto Hemi.

MPVI2, the latest generation of hardware from HP Tuners.

HP Tuners is our software/hardware of choice at OST Dyno. We have tuned on many platforms over the course of many years and HP Tuners takes the cake. Reading, writing, and logging is easier than ever. The module does not marry to the car like other tuners, but rather, cars marry to the module. This means you can tune hundreds of vehicles from one module as long as you purchase the necessary credits.

Vehicle support is vast. See the below list for your application.
***Supported Vehicle List***

 

HP Tuners MPVI2 Module, VCM Suite, & Innovate LC2 w/ Gauge & Gauge Pod - $576.97

This package comes only from OST Dyno. This is our recommended and in-house install choice for a tuning module and wideband kit. You will not find this deal anywhere else! See pictures for installed gauge pod. Gauge goes black when car is off for a stealth appearance.

Modules come with no credits. Please email us to purchase credits for your device. All tuning and data logging software is included. These modules are in stock and ready to ship.

Vehicle support is vast. See the below list for your application.
***Supported Vehicle List***

Gauge Color :

 

Innovate LC2 w/ Gauge - $219.00

Do you ever wonder what your exact air/fuel ratio is? Well, now you can know with Innovate DB digital air/fuel ratio gauge with LC-2 kits. They feature a new, sleek design to match today's modern styles. These kits have a black face, black bezel, and are available with either blue or red LED numbers to fit your needs. Use the included LC-2 wideband controller and Bosch 5-wire oxygen sensor to complete your installation. Also included with the Innovate DB digital air/fuel ratio gauge with LC-2 kits is an oxygen sensor bung and plug, gauge mounting hardware, a CD, and a quick-start information guide.

Gauge Color :

 

Innovate LM-2 Digital Air/Fuel Ratio Meter - $349.00

Do you ever wonder what your exact air/fuel ratio is? These Innovate LM-2 digital air/fuel ratio meter basic kits combine an air/fuel ratio meter and a full-function 32-channel data logger to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, a race carburetor, an aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The Innovate LM-2 digital air/fuel ratio meter basic kits' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. Their self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. They also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. 

 

Dodge 2018+ Smart Access Cable - $89.00

2018 Mopar vehicles have a new security module that renders the OBD2 port inoperable for aftermarket tuners. When this Smart Access cable is installed the factory OBD2 can be used for flashing tunes and data logging identical to prior model years.

Available on backorder

 

Dodge 2018+ Double Bypass Module - $55

2018 Dodge/Chrysler/Jeep vehicles all have a new security module that renders the OBD2 port inoperable for all aftermarket devices and tuners.

The Double Bypass kit overcomes this obstacle by installing a secondary OBD2 port in the trunk, bypassing the security module.

Quick installation!  takes under 5 minutes to install, no wire splicing or cutting – plug and play. *See Instruction Manual Here 

The Double Bypass will also work on 2011-2017 Chargers and 2015-2017 Challengers, for those that want to relocate their Z Automotive devices to the trunk, freeing up the factory OBD2 port for their Diablo Sport / SCT / HP Tuners device.

 

2015-2017 Hellcat "Burnbox" - $229

Line Lock: Press 2 steering wheel buttons, get instant line lock – uses the ABS valves to hold the vehicle with the front brakes so you can hit the gas and do a perfect burnout as long as you wish, with no wear on the rear brakes. No plumbing required! This is a perfect alternative to the traditional plumbed-in solenoid type line lock/roll control. Super simple and cannot be detected! Gone are the days of plumbing in external solenoids in the brake system, having to bleed the brakes and run wires through the firewall to a switch.

Cooldown:  Turn on the engine fan, the intercooler pump, or both (2 speeds) for cooling down the intercooler between runs at the track.  Low battery automatic shutdown.

Light Show: Using the keyfob or steering wheel buttons, turn on a light show that flashes the exterior lights in 9 different patterns.

6 pre-set patterns:
3 customizable make-your-own patterns
Z Automotive Programming Utility (for Windows PCs only) is used for firmware updates and for configuration:
– Choose which exterior lights are included in the patterns
– Create your own patterns
– Choose which patterns to include or remove
– Choose which pattern to start with
– Save custom shows to file or load them from a file
– Can be enabled for in-motion use for authorized users and off-road parade use; email tech support for instructions
Button Remapping: Use the Adaptive Cruise distance buttons (when ACC is off), or install “Aux” buttons or viper cruise button bank and map the buttons for quick access to many of Tazer’s functions.

Vehicle Year :
Model :

 

2018 Hellcat "Burnbox" - $279

Line Lock: Press 2 steering wheel buttons, get instant line lock – uses the ABS valves to hold the vehicle with the front brakes so you can hit the gas and do a perfect burnout as long as you wish, with no wear on the rear brakes. No plumbing required! This is a perfect alternative to the traditional plumbed-in solenoid type line lock/roll control. Super simple and cannot be detected! Gone are the days of plumbing in external solenoids in the brake system, having to bleed the brakes and run wires through the firewall to a switch.

Cooldown:  Turn on the engine fan, the intercooler pump, or both (2 speeds) for cooling down the intercooler between runs at the track.  Low battery automatic shutdown.

Light Show: Using the keyfob or steering wheel buttons, turn on a light show that flashes the exterior lights in 9 different patterns.

6 pre-set patterns:
3 customizable make-your-own patterns
Z Automotive Programming Utility (for Windows PCs only) is used for firmware updates and for configuration:
– Choose which exterior lights are included in the patterns
– Create your own patterns
– Choose which patterns to include or remove
– Choose which pattern to start with
– Save custom shows to file or load them from a file
– Can be enabled for in-motion use for authorized users and off-road parade use; email tech support for instructions
Button Remapping: Use the Adaptive Cruise distance buttons (when ACC is off), or install “Aux” buttons or viper cruise button bank and map the buttons for quick access to many of Tazer’s functions.

Model :

 

HP Tuners Standard Module & VCM Suite - Discontinued

HP Tuners is our software/hardware of choice at OST Dyno. We have tuned on many platforms over the course of many years and HP Tuners takes the cake. Reading, writing, and logging is easier than ever. The module does not marry to the car like other tuners, but rather, cars marry to the module. This means you can tune hundreds of vehicles from one module as long as you purchase the necessary credits.

Each module comes with 8 credits to get you started. All tuning and datalogging software is included. These modules are in stock and ready to ship.

Vehicle support is vast. See the below list for your application.
***Supported Vehicle List***

 

 

HP Tuners Pro Module & VCM Suite - Discontinued

The HP Tuners Pro Module is identical to the Standard Module except for the ability to data log without a laptop, wide band inputs, and 2 programmable outputs.

Each module comes with 8 credits to get you started. All tuning and data logging software is included. These modules are in stock and ready to ship.

Vehicle support is vast. See the below list for your application.
***Supported Vehicle List***

 

 

HP Tuners Pro Module, VCM Suite, & Innovate LC2 - Discontinued

Because the Pro module has auxiliary inputs, this wideband signal does not need to go to a gauge. This package comes only from OST Dyno. This is our recommended and in-house install choice for a tuning module and wideband kit. You will not find this deal anywhere else!

Each module comes with 8 credits to get you started. All tuning and data logging software is included. These modules are in stock and ready to ship.

Vehicle support is vast. See the below list for your application.
***Supported Vehicle List***